What Makes A SuperNova?
The SUPERNOVA subwoofer is hand assembled using high density fiber boards, the cabinet is crafted to exact tolerance for near nil vibration. The SUPERNOVA's unsurpassed performance stems from:

     Millennium Class "A/B" Amp

• 200 watts class "AB" , high efficiency power amplifier.
    
• 24 dB / Octave variable filter from 40 Hz to 160 Hz.
    
• Automatic signal detection circuitry, When "ON", it automatically turn on the subwoofer when an audio signal is detected. It also shuts the subwoofer off after 30 minutes if no signal is detected.
    
• High level (speaker) audio inputs.
    
• Low level (RCA) audio inputs.
    
• Full range speaker outputs that can be used to power up other full range .
If you have any question(s), please click on this button.

                    

Select Your State: ALARAZCA COCTDEFL GAIAIDIL INKSKYLA MAMDMI MNMOMSMT NCNDNENH NJNMNVNY OHOKOR PARISCSD TNTXUTVA VEVTWAWI WVWY               Buy Quantity:

Finish: <% if session("Finish")= "Black" then FinBlk = "Selected" end if if session("Finish") = "Cherry" then FinChry = "Selected" end if %> >Black Ash >Cherry

     MKIV-12

    
• Black plexiglass top cover
    
• One Magma-12 active driver
    
• One SLAPS-12 passive radiator
    
• One BA212-580 watts digital amp
    
• Multi-position remote sensor & control
    
• Dimension 15" x 15" x 15"
If you have any question(s), please click on this button.

                    

PLEASE CONTACT US.
Thank You.

     MKIV-15

    
• Black plexiglass top cover
    
• One Magma-15 active driver
    
• One SLAPS-15 passive radiator
    
• One BA212-580 watts digital amp
    
• Multi-position remote sensor & control
    
• Dimension 19" x 19" x 19"
If you have any question(s), please click on this button.

                    

PLEASE CONTACT US.
Thank You.

     SUB 80

    
• Cabinet Design -port tuned enclosure
    
• 12dB/Octave variable crossover 40Hz -180Hz
    
• 150 watts RMS power amplifier
    
• 8” long throw Earthquake subwoofer
    
• Speaker level (high) audio input-up to 10 Volts
    
• RCA level (low) audio input -0.5 to 2.3 Volts
    
• Auto turn on / signal detection circuitry
    
• 180-degree phase inverting switch
    
• Unobtrusive and easy to position
If you have any question(s), please click on this button.

                    

PLEASE CONTACT US.
Thank You.

     Using One 5-Channel - CINENOVA GRANDE 5

    
• Number of channels: Five discrete monaural blocks.
    
• Power rating per channel:
  (8-ohm load), all channels driven: 300 watts.
  (4-ohm load), all channels driven: 600 watts.
  (2-ohm load), all channels driven: 1000 watts.
  Freq. Response (@1 W w/ ±0.1dB: 20 Hz to 20 kHz.
  
    
• Channel separation: greater than 95 dB.
    
• Max. input voltage: 1.9 volts.
    
• Input impedance: 27,000 ohms.
    
• Total harmonic distortion -THD:
  1 kHz, 8-ohm load: 0.001%.
  20 kHz, 8-ohm load: 0.003%.
  1 kHz, 4-ohm load: 0.003%.
  20 kHz, 4-ohm load: 0.006%.
  1 kHz, 2-ohm load: 0.005%.
  20 kHz, 2-ohm load: 0.006%.
  
    
• Signal to noise ratio:
  @ 1 kHz, 112 dB.
  @ 5 kHz, 111 dB.
  @ 10 kHz, 110 dB.
  
    
• High-pass / low pass variable filter, range 20 Hz to 5 kHz (one/ channel).
    
• High-pass/Full range/Low pass operation via 3-way switches (one switch per channel).
  If you have any question(s), please click on this button.

                      

PLEASE CONTACT US.
Thank You.